EasyManuals Logo
Home>HP>Laptop>2000

HP 2000 User Manual

HP 2000
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
4 Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
Flat-bladed screwdriver
Magnetic screwdriver
Phillips P0 and P1 screwdrivers
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts.
Use care when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to
unseat or seat the cables during removal and insertion. Handle cables by the connector whenever
possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in
such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex
cables with extreme care; these cables tear easily.
Preliminary replacement requirements 33

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 2000 and is the answer not in the manual?

HP 2000 Specifications

General IconGeneral
Bus typeDMI
SteppingQ0
Tjunction85 °C
Processor cache2 MB
Processor cores2
Processor modelB960
System bus rate5 GT/s
Processor familyIntel® Pentium®
Processor seriesIntel Pentium B900 Series for Mobile
Processor socketSocket 988
Processor codenameSandy Bridge
Processor frequency2.2 GHz
Processor cache typeL3
Processor lithography32 nm
Processor manufacturerIntel
Processor front side bus- MHz
PCI Express slots version2.0
Processor operating modes64-bit
ECC supported by processorNo
PCI Express configurations1x16, 2x8, 1x8+2x4
Thermal Design Power (TDP)35 W
CPU multiplier (bus/core ratio)22
Maximum number of PCI Express lanes16
Motherboard chipset-
Memory slots2x SO-DIMM
Internal memory2 GB
Memory form factorSO-DIMM
Internal memory typeDDR3-SDRAM
Maximum internal memory8 GB
Memory layout (slots x size)1 x 2 GB
AC adapter includedYes
Disc types supportedCD, DVD
HDD size2.5 \
HDD speed5400 RPM
HDD interfaceSATA
Storage mediaHDD
Optical drive typeDVD Super Multi
Total storage capacity500 GB
Compatible memory cardsMMC, SD
Number of HDDs installed1
Number of SSDs installed0
Display surfaceGloss
Display diagonal15.6 \
Display resolution1366 x 768 pixels
Native aspect ratio16:9
Display number of colors16.78 million colors
Discrete graphics card modelNot available
On-board graphics card modelIntel® HD Graphics
On-board graphics card base frequency650 MHz
On-board graphics card dynamic frequency (max)1100 MHz
CD read speed24 x
CD rewrite speed10 x
DVD+R read speed8 x
DVD-RW write speed6 x
Speakers manufacturerAltec Lansing
WWANNot installed
Data networkNot supported
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Charging port typeDC-in jack
Headphone connectivity3.5 mm
USB 2.0 ports quantity3
Pointing deviceTouchpad
Operating system installedFreeDOS
Form factorClamshell
Product typeLaptop
Product colorBlack
Country of originChina
Processor codeSR07V
Processor ARK ID59836
Processor package size37.5x37.5 (rPGA988B) mm
Supported instruction setsSSE4.1, SSE4.2
Battery life (max)- h
Number of battery cells6
AC adapter power65 W
AC adapter frequency50 - 60 Hz
AC adapter input voltage100 - 240 V
Cables includedAC
Operating altitude0 - 3050 m
Non-operating altitude0 - 4570 m
Storage temperature (T-T)-15 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)5 - 80 %
Sustainability certificatesRoHS, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth247 mm
Width376 mm
Height35.8 mm
Weight2450 g

Related product manuals