b. Remove the display panel cable (2).
The display panel cable is available using spare part number L23182-001.
8. If it is necessary to replace the wireless antenna cables and transceivers:
a. Release the wireless antenna cables from the retention clips and routing channel built into the side
of the display enclosure (1).
b. Release the antenna from the display enclosure (2).
Antennas are available using the following spare part numbers:
L23158-001: Single antenna
L23159-001: Dual antennas
Use the following image to determine proper cable routing of the antenna cable (1) and display cable (2).
Component replacement procedures 55
To Next Page
Loading...
