HP 2910 Series - Page 37

HP X242 SFP+ SFP+ 3 m
Direct Attach Cable
(J9283B)
Connectivity Length 10 ft. (3 m)
Physical characteristics Weight .49 lb. (0.22 kg), Fully loaded the cable with an
SFP+ transceiver at each end of the cable
Environment Operating temperature 32ºF to 158ºF (0ºC to 70ºC)
Operating relative
humidity
5% to 95%, noncondensing
Nonoperating/Storage
temperature
14ºF to 185ºF (-10ºC to 85ºC)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude up to 10,000 ft. (3 km)
Electrical characteristics Notes 0.04 watts maximum per transceiver end
Notes Electrical Properties
• Cable Characteristic Impedance: 100 ohms
• Crosstalk between pairs: 2% max
• Time delay: 1.31 nsec/ft
Physical Properties
• Cable Diameter: 0.180"
• Minimum Cable Bend Radius: 1.0"
Services Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X242 SFP+ SFP+ 7 m
Direct Attach Cable
(J9285B)
Connectivity Length 22.97 ft. (7 m)
Physical characteristics Weight 1.02 lb., Fully loaded the cable with an SFP+
transceiver at each end of the cable
Environment Operating temperature 32ºF to 158ºF (0ºC to 70ºC)
Operating relative
humidity
5% to 95%, noncondensing
Nonoperating/Storage
temperature
14ºF to 185ºF (-10ºC to 85ºC)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude up to 10,000 ft. (3 km)
Electrical characteristics Notes 0.04 watts maximum per transceiver end
Notes Electrical Properties
• Cable Characteristic Impedance: 100 ohms
• Crosstalk between pairs: 2% max
• Time delay: 1.31 nsec/ft
Physical Properties
• Cable Diameter: 0.180"
• Minimum Cable Bend Radius: 1.0"
QuickSpecs
HP 2910 al Switch Series
Accessory Product Details
DA - 13280 North America — Version 20 — December 12, 2013 Page 37