HP 300s+ User Manual

71
(2) Input the function.
(3) After making sure the function is the way you want, press  .
This displays the start value input screen.
If the initial value is not 1, press  to specify the initial
start value for this example.
(4) After specifying the start value, press  .
This displays the end value input screen.
Specify the end value.
(5) After specifying the end value, press .
This displays the step value input screen.
Specify the step value.
For details about specifying the start, end, and step
values, see “Start, End, and Step Value Rules.”
(6) After specifying the step value, press  .
Pressing the  key returns to the function editor screen.
Supported Function Types
• Except for the X variable, other variables (A, B, C, D, Y)
and independent memory (M) are all treated as values
(the current variable assigned to the variable or stored in
independent memory).
• Only variable X can be used as the variable of a function.
Indicates the initial
default start value of
Indicates the initial
default start value of
Indicates the initial
default start value

HP 300s+ Specifications

General

Type	Scientific
Cover	-
Form factor	Pocket
Control type	Buttons
Product color	Black
Housing material	Plastic
Digits	15 digits
Display type	LCD
Display tilting	No
Display size (HxV)	60.5 x 24.3 mm
Display number of lines	4 lines
Memory registers	9
Battery type	LR44
Power source	Battery
Number of batteries supported	1

Weight and Dimensions

Depth	15 mm
Width	79 mm
Height	153 mm
Weight	112 g