Table 60 Message Body JSON Objects for Port Collection
DescriptionAPI TypeJSON TypeMember
Number of port objects
returned.
int32numberTotal
(Since WSAPI 1.2)
Storage port properties.array of Port Property
objects
array of objectsmembers
(Since WSAPI 1.2)
The total is the number of objects in the collection. The members object is a JSON array of zero
or more JSON objects, one object for each port on the system. These objects are described in
Table 61 (page 66).
Table 61 Port Property JSON Objects
DescriptionAPI TypeJSON TypeMember
Port n:s:p.portPos objectobjectportPos
(Since WSAPI 1.2)
Port mode.portMode Enumnumbermode
(Since WSAPI 1.2)
Port link state.portLinkState EnumnumberlinkState
(Since WSAPI 1.2)
Node WWN that is unique
across all ports.
WWNstringnodeWWN
(Since WSAPI 1.2)
Port WWN for FCoE and FC
ports. Not included in JSON
for other ports.
WWNstringportWWN
(Since WSAPI 1.2)
Port connection type.portConnType Enumnumbertype
(Since WSAPI 1.2)
Hardware address for RCIP
and iSCSI ports. Not
MACstringHWAddr
included in JSON for other
ports.
(Since WSAPI 1.2)portProtocol Enumnumberprotocol
Configurable,
human-readable label
Stringstringlabel
identifying the HBA port.
Maximum length is 15
characters.
(Since WSAPI 1.2)
Array of device name
(cage0, host1, etc.) of the
device connected to the port.
Array of name31array of stringdevice
(Since WSAPI 1.2)
Location of failover partner
port in
portPos objectobjectpartnerPos
66 Working with Ports
To Next Page
Loading...
