HP 3PAR StoreServ 7400 2-node Instructions

1 Restoring the Virtual SP
The HP 3PAR Service Processor (SP) is available in both physical and virtual versions for the SP
4.1 release. An advantage of the virtual SP is the ability to take snapshots that you can then use
to restore the virtual SP to a previous state if needed.
To restore the virtual SP by using a snapshot:
1. In the VMware vSphere Client, right-click your virtual SP, point to Snapshot, and then click
Snapshot Manager.
2. The hierarchy that appears in the left navigation pane shows the virtual SP snapshots that have
been taken. Select the snapshot that you want to restore, and then click Go to.
3. When you are prompted to revert to the snapshot that you selected, click Yes.
If you must rebuild a physical SP, contact HP Support for assistance.
4 Restoring the Virtual SP

HP 3PAR StoreServ 7400 2-node Specifications

General

Brand	HP
Model	3PAR StoreServ 7400 2-node
Category	Storage
Language	English