HP 3PAR StoreServ 7400 2-node User Manual

Table 42 Message Body JSON Objects for Host Modification Request (continued)
DescriptionIgnored ValuesAPI TypeJSON TypeMember
The chap secret for the
host or the target
NullstringstringchapSecret
(Since WSAPI 1.2)
If True, then
chapSecret is
treated as Hex.
NoneBooleanchapSecretHex
(Since WSAPI 1.2)
if True, then remove
target chap only.
NoneBooleanchapRemoveTargetOnly
(Since WSAPI 1.2)
Table 43 (page 55) shows the hostEditOperation enumeration for the chapOperation and
pathOperation JSON objects.
Table 43 Host hostEditOperation Enumeration
DescriptionValueSymbol
Add host chap or path.1ADD
(Since WSAPI 1.2)
Remove host chap or path.2REMOVE
(Since WSAPI 1.2)
Table 44 (page 55) shows the chapOperationMode enumeration for the JSON object.
Table 44 Host chapOperationMode Enumeration
DescriptionValueSymbol
Set the initiator CHAP authentication
information on the host.
1INITIATOR
(Since WSAPI 1.2)
Set the target CHAP authentication
information on the host.
2TARGET
(Since WSAPI 1.2)
Table 45 (page 55) shows the enumeration for the hostPersona JSON object.
Table 45 Host hostPersona Enumeration
DescriptionValueSymbol
Persona with capability of UAReplun,
SESLun.
1GENERIC
Persona with capability of UARepLun,
RTPG, SESLun.
2GENERIC_ALUA
Legacy persona.3GENERIC_LEGACY
Persona with capability of
VolSetAddr, Lun0SCC.
4HPUX_LEGACY
Persona with capability of NACA.5AIX_LEGACY
Persona with capability of SoftInq.6EGENERA
Modifying a Host 55

HP 3PAR StoreServ 7400 2-node Specifications

General

Brand	HP
Model	3PAR StoreServ 7400 2-node
Category	Storage
Language	English