EN Chapter 6 Removing and replacing parts 163
Figure 69. Removing the tray 1 pickup assembly—front side
6 Remove the four screws (callout 1) shown, and carefully pull the tray 1 pickup assembly straight
out.
CAUTION Do not damage the solenoid cable on the right side of the tray 1 pickup assembly.
Note The left side toner cartridge might become dislodged while removing the tray 1 pickup assembly. Ensure
the left side toner cartridge guide is installed before reinstalling the four screws that secure the tray 1
pickup assembly.
2
1
To Next Page
Loading...