164 Removing and replacing parts EN
Right side toner cartridge guide
Remove the right side toner cartridge guide to get to the printer drive assembly. Follow the steps
below:
1 To remove the tray 1 pickup assembly:
a Remove the rear right side cover (page 138).
b Remove the control panel (page 139).
c Remove the top cover (page 141).
d Remove the front right side cover (page 144).
e Remove tray 1 (page 146).
f Remove the tray 1 pickup assembly (page 161).
Figure 70. Removing the right side toner cartridge guide
2 Remove the small silver screw (callout 1) to disconnect the ground wire.
3 Remove the self-tapping screw (callout 2) on the right front side of the printer.
4 Lift the right side toner cartridge guide off the printer.
5 Unplug the three connectors (callout 3).
2
3
2
2
2
1
To Next Page
Loading...