HP 524pf - Page 15

4
Disconnect OSD_FFC &
USB_LVDS from the
connector of I/F_BD.
N/A
6
1. Tear off adhesive
tape* 1pcs
2. Unplug the Panel light
bar connector
3. Unplug the PWR_BD
connector
4. Tear off tape on LVDS
*1pcs.
5. Disconnect I/F-BD to
panel with LVDS
6. Take MAIN-SHD from
MF
N/A
7
Unfixed the middle frame
by screws * 13pcs
(1)Screwdriver：
TORQUE
4.5.0±0.5 (KG-
CM), HOLE
SIZE M3*0.5
(MM) and Screw
Head #2
8
Unfixed the deco by screw
* 4pc
(1)Screwdriver：
TORQUE
2.0±0.5 (KG-
CM), HOLE
SIZE 1.75*0.05
(MM) and Screw
Head #0
9
Disassemble safety Mylar
(4K.68401.001).
N/A
IF-BD