To Next Page

To Previous Page

1-25

Introducing the HP 5400R zl2 Switches

Switch Features

Introducing the HP 5400R zl2

Switches

• Routing Information Protocol (RIP) - provides RIPv1 and RIPv2

routing

• OSPF - provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing

• Policy-based routing - uses a classifier to select traffic that can be

forwarded based on policy set by the network administrator.

• Border Gateway Protocol (BGP) - provides IPv4 Border Gateway

Protocol routing, which is scalable, robust, and flexible

■ Support for many other advanced features to enhance network perfor-

mance, security, and control - for a description, see the Management and

Configuration Guide which is on the HP networking Web site.

■ Support for IEEE 802.3af standard, IEEE 802.3at standard, and

pre-standard PoE devices.

■ Supports dual management module capability.

■ Supports 100% POE+ capacity at low line

■ Supports existing v2 zl and v3 zl2 modules

■ Support for three new Power Supplies

• BPSU (Base Power Supply unit - J9828A): Lower cost alternative

• LPSU (Low Power Supply unit - J9829A)

– Dual-output 12V and 54V, with one C16 power receptacle

– For support of mid-range POE/POE+ installations

• HPSU (High Power Supply Unit - J9830A)

– Dual-output 12V and 54V, with two C20 power receptacle

– For support of maximum POE/POE+ installations

■ Support for Trusted Platform Module (TPM) subsystem for storing certif-

icates and secure identity

HP 5400R zl2 Series User Manual

Questions and Answers: