HP 54520 Series - Multiple Menu

Figure 9-3
Waveform Save Menu
Multiple Menu
Multiple Menu
You can use the multiple menu to display one of the 665 possible volatile
failure memories. These are the memories where failure data from both the
limit and waveform comparison tests are saved. Failure data stored in
volatile multiple memories can be viewed, or transferred to nonvolatile
memories m1 through m4. The multiple memories store 500 points of
waveform information (no raw data) in each memory. Measurements are not
performed unless the data is first transferred into one of the nonvolatile
memories.
WAVEFORM SAVE
waveform pi
mask
- saved source —
~ max seved=131
- failure #
14it2i36
06 AUG 19 ,
; view failures
ort
panazoad
store failure
- protect