HP 54520 Series - Page 157

Waveform Save Menu
Multiple Menu
Nonvolatile Softkey
The nonvolatile softkey selects which of the four nonvolatile memories to
use when transferring multiple memory failure data. The selections are
nonvolatile memories m1, m2, m3 and m4. When a memory is turned on
(using the waveform menu), the small circle below the label is highlighted.
When the memory is protected, the small circle has an "x" through it.
Saved Source Softkey
The saved source softkey selects the multiple memory source to view or
to transfer. The source alternatives are any channel or function that has
failure data saved, as selected when configuring the limit or compare tests in
the define measurement menu. When the saved source softkey displays
"None", no failure data is available (max saved=0). The maximum number of
data records saved is also displayed on the bottom portion of the softkey
display.
Failure # Softkey
The failure # (number) softkey selects a specific multiple memory to
view or to transfer. Also, it displays the time and date the selected record
was saved. The source is specified using the saved source softkey. The
maximum number records available are displayed at the bottom of the saved
source softkey. When "NO FAILURES' is displayed, no failure data is
available.