HP 556dn

4. Load paper into the tray. Check the paper to
verify the guides lightly touch the stack, but do
not bend it. For information about how to orient
the paper, see 3 x 500-sheet tray paper
orientation on page 32.
5. Close the tray.
O
ffi
c
e
j
e
t
E
nt
e
r
pris
e
C
o
l
o
r
X
5
56
2
3 x 500-sheet tray paper orientation
When using paper that requires a specic orientation, load it according to the information in the following
table.
NOTE: The Alternative Letterhead Mode settings aects the way to load letterhead or preprinted paper. This
setting is disabled by default. When using this mode, load paper as for automatic duplex printing. For more
information, see Use alternative letterhead mode on page 35
32 Chapter 2 Paper trays ENWW