1.
Separate the two instrument sections and wrap each in heavy paper or plastic.
2.
Place the instrument sections in separate containers with 8 to 10 cm (3 to 4 inches) of
shock-absorbing material around all sides to provide firm cushioning and prevent movement
inside the container. Protect front panels with cardboard. Double-wall corrugated cartons
of 125 kg (275 lb) bursting strength are sufficient for shipping containers.
3.
Seal each container securely and, if shipping to a Hewlett-Packard office or service center,
attach a tag to each container indicating the type of service required, return address, model
number, and full serial number. For your convenience, a supply of tags is included at the
end of this section.
4.
Mark each container FRAGILE to assure careful handling.
ITEM
QTY
1
2
1
HP PART NO.
9211-4487
5180-2319
5180-2320
DESCRIPTION
OUTER BOX
INNER FOAM PAD
INNER BOX
Figure 1. Packaging for Shipment Using Factory Packaging Materials
4 IF-Display Section General Information
To Next Page
Loading...
