HP 8593A

timues are usually much faster for ssvept-response measuremnents. Option 0/0
or 01/ only.
SWP TIME AUTO MAN allows you toeither change the sweep time unanually or
automoatically recoupie it.
TNRESNLD ON OFF sets time losver boundary of the active trace. ‘l’lne
threshold line “clips” signals that would otimerw-ise appear beIosv tine hoe.
TIMEDATE accesses tine softkey meunu that is mused to set and display tine
real-tinme clock.
TIMEDATE ON OFF allow-s you to turn tine display of tIme real-tinue clock on or
oft.
accesses the softkey nmenmun that allow’ you to store and unraripumlate
trace informoatiour.
TRACE A allow’s you to recall previomusly saved trace data imuto tran:e A or to
save trace data frono trace A.
TRACE A B C allows yomu to select functiouns for trace A, trace ii,or trace C.
TRACE B alloses you to recall previomusly saved trace data iumto trace hi or to
save trace dmmta froun trace II.
TRACE C allow’s yomu to recall previously saved trace data into trace C or to
save trace data fromum trace C.
TRACE —> CARD saves tine spectrumn analyzer trace data, limit-line tables, or
anmplitude correctionfactors on a RAM card. Tlue inforunation in saved imm a
file tlmat imas time speci lieni prefix.
TRACE —> INTRNL saves time spectrum analyzer trace data, linmit-liume tahies,
or anmplitmmnie correctiomu factors imu spectrum aunalyzer nuemmmory.
TRACK GEN displays softkey- nmemmus for use w’itin a bmmiit-imm trackinrg gemmerator.
Option 010 or 011 on/p.
TRACKING PEAK activates a routine tinat automatically adjusts the tracking
adjmmstnment to olstain tinm’ peak response of time trackinggenerator. Optiomn
010 or 011 on/p.
iamn accesses the softkey menu that is used for selectioun of time ssveein nuonie
anmi trigger unonle.
2-22 Spectrum Analyzer Functions