HP 8920B - Page 200

200
Equivalent Front-Panel Key Commands
To Reset Averaging.
Use the :AVERage:RESet commands to restart the
averaging algorithm used to calculate an averaged measurement.
Syntax
:AVERage:RESet
Example
OUTPUT 714;"MEAS:AFR:DISTN:AVER:RES"
This resets the AVG Data Function for the Audio Frequency Analyzer
Distortion measurement.
To Set the Number of Averages. Use the :AVERage:VALue commands to set the
number of averages used by the averaging algorithm.
Syntax
:AVERage:VALue
Example
OUTPUT 714;"MEAS:AFR:DISTN:AVER:VAL 25"
This sets the number of averages to 25 for the AVG Data Function for
the Audio Frequency Analyzer Distortion measurement.
To Query the Number of Averages. Use the :AVERage:VALue? commands to
query the number of averages used by the averaging algorithm.
Syntax
:AVERage:VALue?
Example
OUTPUT 714;"MEAS:AFR:DISTN:AVER:VAL?"
ENTER 714;Num_of_avgs
This queries the number of averages for the AVG Data Function for the
Audio Frequency Analyzer Distortion measurement.