221
Equivalent Front-Panel Key Commands
HOLD
The HOLD key is used to hold/resume all active measurements. There is no
equivalent HP-IB command for the HOLD key. However, the functionality of the
HOLD key can be implemented remotely by using Single Triggering of
measurements. Refer to "Triggering Measurements" on page 243.
PREV
The PREV key is used to display the previously displayed screen. There is no
equivalent HP-IB command for the PREV key function.
PRINT
The PRINT key is used to print a “pixel dump” of the currently displayed screen
to an external printer. There is no equivalent HP-IB command to the PRINT key.
To print measurement results through HP-IB, the program must query the
measurement and print the result in a format determined by the programmer.
To Next Page
Loading...
