328
Chapter 5, Advanced Operations
Instrument Initialization
*RST IEEE 488.2 Common Command
The *RST Reset is accomplished by sending the *RST Common Command to the
Test Set through the HP-IB bus.
For the CONFIGURE, PRINT CONFIGURE, TESTS (Execution Conditions),
TESTS (Printer Setup) and I/O CONFIGURE screens,
table 29 lists the fields
which are restored/initialized when the *RST command is received. The restored
state or initialized value is listed below the field name. Fields which are not listed
are maintained at their current value, whatever that may happen to be. All fields in
the TESTS (Main Menu) screen and the TESTS (External Devices) screen are
maintained at their current state/value. The current state/value of the maintained
fields can be ascertained programmatically.
To Next Page
Loading...
