556
Chapter 8, Programming The Call Processing Subsystem
Programming The CALL BIT Screen
Reading the CALL BIT Screen Message Fields
This section provides programming information on how to read the contents of
individual fields in the signaling messages available on the CALL BIT screen.
The syntactical structure for reading the contents of one or more fields from an
individual message is as follows:
General Syntax
CALLP:AMPS:<message name>:<field name><?>[<;><additional field><?>]
Table 49 on page 557 lists the message names used to access each of the signaling
messages available on the CALL BIT screen.
To Next Page
Loading...
