563
Chapter 8, Programming The Call Processing Subsystem
CALL BIT Screen Message Field Descriptions
SPC WORD2 Message Fields
Figure 55 SPC WORD2 Message Fields
T1T2
This field identifies the received message as an order confirmation, an order, or a called address
message.
2 binary characters required.
DCC
Digital color code field.
2 binary characters required.
S
This field displays whether the serial number word is sent to the mobile station.
• Set to ‘1’ if the serial number word is sent.
• Set to ‘0’ if the serial number word is not sent.
1 binary character required.
To Next Page
Loading...
