HP 8920B - Page 573

573
Chapter 8, Programming The Call Processing Subsystem
CALL BIT Screen Message Field Descriptions
CMAC
Control mobile attenuation field. Indicates the mobile station power level associated with
reverse control channel.
3 binary character required.
RSVD1
Reserved for future use, all bits must be set as indicated.
2 binary characters required.
F2
Control filler message field 2. All bits must be set as indicated.
2 binary characters required
RSVD2
Reserved for future use, all bits must be set as indicated.
2 binary characters required.
F3
Control filler message field 3. All bits must be set as indicated.
1 binary character required.
WFOM
Wait-for-overhead-message field.
1 binary character required.