657
Error −110 Command header error
An error was detected in the header.
Error −111 Header separator error
A character which is not a legal header separator was encountered while parsing the
header.
Error −112 Program mnemonic too long
The header contains more than twelve characters (see IEEE 488.2,7.6.1.4).
Error −113 Undefined header
The header is syntactically correct, but it is undefined for this specific device. For
example, *XYZ is not defined for any device.
Error −114 Header suffix out of range
Indicates that a nonheader character has been encountered in what the parser expects is a
header element.
Error −120 Numeric data error
This error, as well as errors −121 through −128, are generated when parsing a data element
which appears to be numeric, including the nondecimal numeric types.
Error −121 Invalid character in number
An invalid character for the data type being parsed was encountered. For example, an
alpha in a decimal numeric or a “9” in octal data.
Error −123 Exponent too large
The magnitude of the exponent was larger than 32000 (see IEEE 488.2, 7.7.2.4.1).
Error −124 Too many digits
The mantissa of a decimal numeric data element contained more than 255 digits excluding
leading zeros (see IEEE 488.2, 7.7.2.4.1).
To Next Page
