664
Error −260 Expression error
Indicates that an expression program data element related error occurred.
Error −261 Math error in expression
Indicates that a syntactically legal expression program data element could not be executed
due to a math error. For example, a divide-by-zero was attempted.
Error −270 Macro error
Indicates that a macro-related execution error occurred.
Error −271 Macro syntax error
Indicates that a syntactically legal macro program data sequence, according to IEEE
488.2, 10.7.2, could not be executed due to a syntax error within the macro definition (see
IEEE 488.2, 10.7.6.3).
Error −272 Macro execution error
Indicates that a syntactically legal macro program data sequence could not be executed
due to some error in the macro definition (see IEEE 488.2, 10.7.6.3).
Error −273 Illegal macro label
Indicates that the macro label defined in the *DMC command was a legal string syntax,
but could not be accepted by the device (see IEEE 488.2, 10.7.3 and 10.7.6.2). For
example, the label was too long, the same as a common command header, or contained
invalid header syntax.
Error −274 Macro parameter error
Indicates that the macro definition improperly used a macro parameter placeholder (see
IEEE 488.2, 10.7.3).
Error −275 Macro definition too long
Indicates that a syntactically legal macro program data sequence could not be executed
because the string of block contents were too long for the device to handle (see IEEE
488.2, 10.7.6.1).
To Next Page
Loading...
