ENWW 2-3
Auto-duplex unit
The printer can automatically print on both sides of a sheet of paper when the auto-duplex unit
is attached to the back of the printer.
For instructions on installing and using the auto-duplex unit, see “Using the auto-duplex unit”
and “Printing on both sides (duplexing)”.
1 Buttons – Push these buttons in to remove the auto-duplex unit from the printer.
2 Rear cover – Remove this cover to clear any jammed paper from the auto-duplex unit.
3 Rear cover release buttons
The auto-duplex unit is a standard part in the hp deskjet 9670. It may be purchased separately
in some countries/regions (see “HP supplies and accessories”).
3
1
2
To Next Page
Loading...