3–10
2. To verify the system operation, type the following at the CSTM> prompt:
CSTM> verify all
RETURN
Messages that are similar to the following appear:
Verification
has started on device (CPU).
Verification has started on device (FPU).
Verification has started on device (0/0/0).
Verification has started on device (2/0/1.5.0).
Verification has started on device (2/0/1.6.0).
Verification has started on device (2/0/2).
CSTM>
Message from (0/0/0):
This graphics test displays a number of graphics images on
the screen of the graphics device being tested. If an X
server is not currently running on that display, X Windows
will be started and run for the duration of the test. The
Starbase shared library (/usr/lib/libsb.sl) should be present
to run this test.
CAUTION: This test will fail if any portion of the test window is modified or
overlaid in any way.
NOTICE: If a VUE login screen is currently displayed on the monitor, the test
will wait until someone logs in the HP VUE on the graphics monitor
to release the lock. The test stops if the Screen Saver times out; it
runs again once the Screen is activated.
CAUTION: Do not run this exerciser with any other operation.
(Type ’R’ for Ready, Type ’S’ for Skip) [R] >>
To Next Page
Loading...
Need help?
General