Reference 41
SCR Reference (man Pages)
scr (5) - Using Tags and Filters
masked.
#scrviewer node2:199804181305
node2 : 04/18/1998 13:05 PDT
No filter applied.
COMPONENT NAME VALUE
GROUP NAME
ATTRIBUTE NAME
"HP-UX Installed Software Definition"
"Bundle Contents"
"scr dmi class"
HPUX_BundleContents_
"scr dmi version" 001
"scr dmi key" "Bundle Software
Specification,Index"
[Bundle Software Specification]
B3899BA,r=B.11.01.01
[Index] 001
: :
"HP-UX Standard Groups Definition"
"DNS Configuration"
"scr dmi class"
HPUX_BundleContents_
"scr dmi version" 001
"Domain Name" dom1.hp.com
: :
To mask the component, the following steps can be taken:
1. Create a view filter named filter1.
2. # scrfilter -c Template filter1
3. Set the mask for the component with
4. # scrfilter -s filter1 "HP-UX Installed Software
Definition" off
5. Use the filter1 filter with the scrviewer command to
successfully exclude the HP-UX Installed Software Definition
component.
6. # scrviewer -f filter1 node2:199904181305
node2 : 04/18/1998 13:05 PDT
Filter "filter1" applied.
COMPONENT NAME VALUE
GROUP NAME
ATTRIBUTE NAME
"HP-UX Standard Groups Definition"
"DNS Configuration"
"scr dmi class" HPUX_BundleContents_