78 Reference
SCR Reference (man Pages)
scrlog_viewer (1M) - Options
The component filters control the component to be displayed. The
component filters are:
Configuration scrconfig (1M), scrstatus (1M)
Data Management scrupdate (1M), scrdelete (1M)
Filter Management scrfilter (1M)
Tag Management scrtag (1M)
Presentation scrhist (1M), scrdiff (1M) and scrviewer (1M)
Repository Repository activities
Other Reserved for future commands
All All of the above components
The date/time filters are used to ask for entries written since a specific
date/time, before a specific date/time, or both.
The user filters are supported for compatibility with samlog and dmilog
only. SCR requires root privilege to operate.
Options
The following options enable you to set up filtering and other attributes.
If scrlog_viewer runs interactively, these attributes may also be set
and modified in the various supported menus and displays. The
available options are:
-s
MMDDhhmm [[ CC ] YY ]
The -s option sets the start date/time
filter to the date/time given by its argument. The
date/time is specified in the following format:
MM
Month specified as a two digit number
(01-12).
DD
Day specified as a two digit number
(01-31).
hh
Hour specified as a two digit number
(00-23).
mm
Minute specified as a two digit number
(00-59).
CC
The first two digits of the desired year
(19-20).
YY
The last two digits of the desired year
(70-99, 00-37).
The range of valid years without the
first two digits (
CC
) is 1970-1999,
2000-2037. If the year is specified as a
four digit number, the valid range is