EasyManua.ls Logo

HP A7533A - Brocade 4Gb SAN Switch Base - Customizing the switch name

HP A7533A - Brocade 4Gb SAN Switch Base
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Upgrades from Fabric OS 6.3 to future releases will be nondisruptive to data traffic and will have
behavior similar to a CP failover; ethsw remains unchanged.
Downgrade from Fabric OS 6.3 to 6.1.2_cee1 is disruptive if ethsw is enabled on Fabric OS
6.3.
Downgrade from Fabric OS 6.3 to 6.1.2_cee1 is nondisruptive if ethsw has never been enabled
with Fabric OS 6.3.
Connecting a 2408 FCoE Converged Network Switch to an FCR-capable switch with fcrbcast
config enabled will cause a storm of broadcast traffic, resulting in termination of iswitchd.
When rebooting a DC SAN director or DC04 SAN director with DC SAN 10/24 FCoE blade,
Qlogic CNA and LSAN zoning, the switch becomes unresponsive for a period of time. This is due
to the CNA sending excessive MS queries to the switch.
28

Other manuals for HP A7533A - Brocade 4Gb SAN Switch Base

Related product manuals