Figure 6: Four Physical Displays, Single Logical Screen (2X2)
• It is possible to include a Screen Entry and an SLS Screen Entry in the same X*screens File.
This creates a situation where there are two X Screens (e.g. <host>:0.0 and <host>:1.0), one of
which happens to be a Single Logical Screen. Below is an example of this:
•
Screen /dev/crt0
SingleLogicalScreen 1 2
/dev/crt1 /dev/crt2
Figure 7: Three Physical Displays, Screen plus Single Logical Screen (1X2)
Graphics Administration Guide for HP-UX 10.20
To Next Page
Loading...
