HP 290 G2 MT Business User Manual

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP 290 G2 MT Business PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
PCA
1
Batteries
All types including standard alkaline and lithium coin
or button style batteries Lithium Coin Battery on
MB
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries NA
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps NA
0
Cathode Ray Tubes (CRT)
NA
0
Capacitors / condensers (Containing PCB/PCT)
NA
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
NA
0
External electrical cables and cords
NA
0
Gas Discharge Lamps
NA
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
NA
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations. NA
0
Components and waste containing asbestos
NA
0
Components, parts and materials containing
refractory ceramic fibers
NA
0
Components, parts and materials containing
radioactive substances
NA
0

HP 290 G2 MT Business Specifications

General

RAM	Up to 32 GB DDR4-2666 SDRAM
Operating System	Windows 10 Pro
Optical Drive	DVD-Writer
Form Factor	Microtower
Processor	Intel Core i3/i5/i7
Storage	Up to 2 TB HDD or 512 GB SSD
Graphics	Intel UHD Graphics 630
Audio	Realtek ALC3601 Audio Codec
Expansion Slots	1 PCIe x16, 1 PCIe x1, 1 M.2
Front Ports	1 headphone/microphone combo
Rear Ports	4 x USB 2.0, 1 x VGA, 1 x HDMI, 1 x RJ-45
Ports	Refer to Front and Rear Ports
Power Supply	180 W internal power supply
Dimensions	17 x 27.4 x 33.8 cm

Summary

Items Requiring Selective Treatment

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

Identifies Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) requiring selective treatment.

Batteries

Lists all types of batteries, including standard alkaline and lithium coin or button style batteries.

Mercury-containing components

Lists components containing mercury, such as lamps and display backlights.

Components and waste containing asbestos

Identifies components and waste materials that contain asbestos.

Tools Required

Ph2 screw driver

Tool for disassembling 1 screw for the access panel.

T15 screw driver for side bracket

Tool for disassembling 4 screws for side bracket and lower case.

T15 screw driver for PCI cover

Tool for disassembling 2 screws for PCI cover and main bracket.

T15 screw driver for motherboard

Tool for disassembling 6 screws for the motherboard and main bracket.

Product Disassembly Process

Step 1: Remove lower case

Instruction to remove the lower case from the housing.

Step 2: Disconnect ODD cables

Instruction to pull off ODD SATA and ODD power connectors.

Step 3: Remove ODD and HDD

Instruction to remove ODD and loosen screws to remove HDD.

Step 4: Remove front bezel

Instruction to remove the front bezel from the housing.