HP Broadband Series - Control Panel at a Glance; Receiver

1-4
Control Panel at a Glance
Receiver
Setting the 20 dB radio button on directs the received signal through the amplifi-
cation circuitry which provides a fixed 20 dB gain. When the 0 dB radio button is
selected, the received signal is not amplified.
Manage Configuration
files with these menus.
See “Getting Started” in
your HP E1697A
155 Mb/s Optical Line
Interface User’s Guide.
View the application and
firmware versions, and
module identification details.
Set signal amplification.
See below.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com