iii
Contents
Internal Drives—Installation Overview inside front cover
1 Installing Your Internal Drive
Before You Start 1-2
Registering Your Tape Drive 1-4
Step 1: Check the Drive’s SCSI ID 1-5
Step 2: Attach Local Language Labels if Necessary 1-7
Step 3: Prepare the Mounting Bay 1-8
Step 4: Attach Mounting Rails or Tray (if required) 1-8
Step 5: Install the Drive 1-9
Step 6: Attach Power and SCSI Cables 1-10
Step 7: Secure the Drive 1-12
On Completion 1-12
What Next? 1-13
2 Installing an External Drive
Before You Start 2-2
Step 1: Check the Drive’s SCSI ID 2-5
Step 2: Attach Local Language Labels if Necessary 2-8
Step 3: Attach the SCSI Terminator 2-8
Step 4: Connect the SCSI Cable 2-8
Step 5: Connect the Power Cable 2-9
On Completion: 2-10
Registering Your Tape Drive 2-11
What Next? 2-12
3 Operating the Drive
Front Panel (HP SureStore DLT 80) 3-2
Front Panel (HP SureStore DLT 70) 3-4
Front Panel (HP SureStore DLT 40) 3-6
Operating the Drive 3-8
Using the Cartridge Locking Handle 3-9
The Power-On Self-Test 3-12
dlt.book Page iii Monday, February 12, 2001 5:42 PM
To Next Page
Loading...
