Index-2
loading a cartridge 3-10
low-voltage differential 2-8
LVD 2-8
LVD host bus adapters 2-3, A-3
M
maintenance Ch.5
moving cartridges 4-9
N
noise in the drive 4-7
noise level A-3
non-operating limits A-3
O
online services B-4
on-off switch 3-8
Operate Handle light 3-3, 3-5, 3-7,
3-10
operating limits A-3
operating the drive Ch.4
operating too soon 4-6
ordering information A-5
P
packaging B-4
parity checking, disabling 1-6
performance specification A-2
phone numbers B-5
physical specification A-2
positioning drives 2-4
power
external connection
2-9
internal connection 1-10
requirements A-2
switch 2-5
termination 1-7
powering off a drive 3-9
powering on a drive 3-8
power-on self-test 3-12
problems Ch.7
R
radio interference statements
See back of book
rails, attaching to 1-8
rear panel 2-5, 3-8
reel hubs 4-7
registering the drive 1-4, 2-11
regulatory information See back
of book
reliability specification A-4
returning a drive B-4
rewind time A-2
S
safety certifications See back of
book
safety specification A-4
SCSI
adapter
A-5
cables
external drives
2-3, 2-8
internal drives 1-10
checking IDs 2-6
connectors
external drives
2-5
internal drives 1-10
ID
external drive
2-5
internal drive 1-5
ordering accessories A-5
specification A-3
termination
external drives
2-8
internal drives 1-7
SE 2-8
Select button 3-2, 3-4, 3-6, 5-5
self-test 3-8, 3-12
failure 6-2
service agreements B-4
shock, drive tolerance A-3
single-ended SCSI 2-8
siting drives 2-4
software 1-13, 2-4, 2-11
software data compression 5-3
specifications
electromagnetic emissions
A-4
environmental A-3
interface A-3
performance A-2
physical A-2
reliability A-4
safety A-4
stabilizing see conditioning
static, damage from
1-8
storing cartridges 4-9
support B-3
telephone numbers B-5
switching off a drive 3-9
switching on a drive 3-8
T
tape cartridges
compression, controlling
5-2
conditioning 4-9
density, changing 5-2
door 4-6
handling 4-7
impact and vibration 4-9
inspecting 4-6
labeling 4-8
leader 4-6
loading 3-10
looking after 4-5
lost leader 4-7
ordering A-5
storing 4-9
transporting 4-9
types 4-4
unloading 3-11
write-protecting 4-4
tape heads, cleaning 4-2
Tape in Use light 3-3, 3-5, 3-7, 3-10
flashing 6-4
TapeAssure 1-12, 2-10, 6-2
checking configuration 1-5,
1-12, 2-6
installing 1-5, 2-6
purpose 1-12
verifying installation 1-12
technical support B-3
telephone numbers B-5
temperature
conditioning cartridges
4-8
non-operating limits A-3
operating limits A-3
storing cartridges 4-9
varying 4-9
termination in internal drives 1-7
termination power
in internal drives
1-7
terminators, SCSI 2-8
ordering A-5
testing installation 1-12
times A-2
toner, keeping away from 2-4
transporting cartridges 4-9
dlt.book Page 2 Monday, February 12, 2001 5:42 PM
To Next Page
Loading...
