ENWW Introducing the HP Jetdirect Print Server 15
Firmware Installation Tools
Firmware upgrades for supported HP Jetdirect print servers may
be installed over a network using one of the following firmware
installation tools:
● HP Jetdirect Download Manager (Windows). HP Jetdirect
Download Manager can be downloaded from HP online support
at:
http://www.hp.com/go/dlm_sw
● HP Web Jetadmin may be used on supported systems. For more
information on HP Web Jetadmin, visit:
http://www.hp.com/go/webjetadmin/
● For firmware versions x.24.00 and later, the embedded Web
server resident on the print server provides a firmware upgrade
feature using your Web browser. For more information see
Chapter 4
.
● For firmware versions x.22.00 and later, FTP (File Transfer
Protocol) may be used to transfer a firmware upgrade image file
to the print server. To start an FTP session, use the device IP
address or host name. If a password is set, it must be entered to
log into the device. After user login, typical FTP commands to
upgrade the device are illustrated below:
ftp> bin
ftp> hash
ftp> cd /download
ftp> put <firmware image filename; specify full pathname>
ftp>######### <Wait for FTP to complete the download>
ftp> bye
To Next Page
Loading...
Need help?
General
