HP C8088B Administrator's Guide

ENWW HP Jetdirect 802.11b Wireless Print Servers 268
Using Your Web Browser (Windows and Mac OS). To use
your Web browser to configure the Jetdirect wireless print server
with a wireless connection to your network, your system must be
set up for operation on a TCP/IP network.
Web browser wireless connection instructions are provided for the
following systems: Microsoft Windows, and Apple Macintosh (see
page 270
).
● Microsoft Windows. To use your Web browser on a Windows
system, follow these steps:
1. Verify that your computer’s wireless network settings match the
factory-default settings on the HP Jetdirect print server.
2. Open a DOS Command Prompt window.
3. At the command prompt, enter ipconfig. The ipconfig
command will display the computer’s IP address. Record this
address.
4. Use a “route add” command to establish an IP path (or route)
from your wireless computer to the print server. (This means
that there must be a match between the network identification
of your system to that of the HP Jetdirect print server. If the
print server is configured with its default IP address, for
example 169.254/16 or 192.0.0.192, a route may not exist.)
Note A typical route add command is entered as
follows:
where <Jetdirect IP address> is th e IP a ddr es s
on the HP Jetdirect print server, and <system IP
address> is the IP address set on the computer's
network card.
Example:
route add <Jetdirect IP Address> <system IP Address>
route add 192.0.0.192 192.170.1.2

HP C8088B Specifications

General

Brand	HP
Model	C8088B
Category	Printer Accessories
Language	English