ENWW Security Features 187
● Unused protocols disabled
● HTTPS access enabled using
certificates issued by trusted
sources
● Wireless Jetdirect print servers
configured for 802.1x EAP
authentication that use
dynamic encryption
● SNMP v3 enabled, SNMP
v1/v2c disabled
● Telnet disabled
● Passwords set
● The Access Control List
contains specified entries and
HTTP connections are
checked
● Printer control panel locked
High
High security for non-trusted, professionally
managed environments.
Access is limited to authenticated hosts that are
specified in the Access Control List. Encryption
provides data privacy; network communication in
plain-text is not used.
CAUTION: Power-on settings (for example,
configurations from a BootP/TFTP or
DHCP/TFTP server) may change the print
server’s settings when it is power-cycled. Be sure
to confirm your intended power-on settings.
Table 7.2 Settings for Access Control
Settings Level of Access Control
To Next Page
Loading...
Need help?
General
