EasyManuals Logo

HP C8088B Administrator's Guide

HP C8088B
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #234 background imageLoading...
Page #234 background image
ENWW HP Jetdirect Configuration Page 234
10 LAN ERROR -
UNDERFLOW
(Wired Ethernet) There may be a problem with your network
cabling or the HP Jetdirect print server. Check the cabling
and connectors on your network. If you cannot find a
problem with your network cabling, run the power-on
self-test: turn the printer off, then on again. If the error
persists, there is a problem with the HP Jetdirect print
server.
10 LAN ERROR-AUTO
REMOVAL
(Token Ring) The HP Jetdirect print server detected an
internal hardware error following the Token Ring beacon
auto-removal process and has removed itself from the ring.
11 LAN ERROR -
RETRY FAULTS
(Wired Ethernet) There is a problem with your network
cabling or external network configuration. Verify operation
of the hub or switch port.
11 LAN ERROR -
REMOVE RECEIVE
(Token Ring) The HP Jetdirect print server has received a
Remove Adapter data frame during the Token Ring insertion
process, or has received a remove ring station data frame
request, and has removed itself from the ring.
12 LAN ERROR -
NO LINKBEAT
With a 10/100 Base-TX port connected, this message is
displayed if Link Beat is not sensed. Check the network
cable, and verify that the concentrator/hub is providing Link
Beat.
13 NETWORK
RECONFIG - MUST
REBOOT
Reset or power off/on the HP Jetdirect print server to enable
new configuration values.
14 DISCONNECTED The Novell NetWare protocol is disconnected. Check the
server and the print server.
15 CONFIGURATION
ERROR
(Ethernet) The configuration information for the NetWare
functions is not stored correctly on the HP Jetdirect print
server. Use the installation software, embedded Web
server, or other tools to reconfigure the print server. If this
error persists, there may be a problem with the HP Jetdirect
print server.
16 NOT CONFIGURED (Ethernet) The HP Jetdirect print server has not been
configured for NetWare. Use the installation software,
embedded Web server, or other tools to configure the print
server for NetWare networks.
Table 9.12 Error Messages (3 of 11)
Error Code and
Message
Description

Table of Contents

Other manuals for HP C8088B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP C8088B and is the answer not in the manual?

HP C8088B Specifications

General IconGeneral
BrandHP
ModelC8088B
CategoryPrinter Accessories
LanguageEnglish

Related product manuals