HP C8088B Administrator's Guide

ENWW The HP Jetdirect Control Panel Menu 282
CFG LINK= (10/100Base-TX print servers only) Selects whether you want to
manually configure the HP Jetdirect print server’s network link.
NO (default): Bypass the link configuration menu items.
YES: Access the link configuration menu items.
For 10/100Base-TX networks, the link speed and communication
mode must match the network. One of the following link
configurations can be set:
AUTO (default): The print server will automatically configure itself
to match the network’s link speed and communication mode.
If it fails, 100TX Half will be set.
10T HALF: 10Mbps, half-duplex operation
10T FULL: 10 Mbps, full-duplex operation
100TX HALF: 100 Mbps, half-duplex operation
100TX FULL: 100 Mbps, full-duplex operation
WEB= For configuration management, specify whether the embedded
Web server will accept communications using HTTPS (Secure
HTTP) only, or both HTTP and HTTPS.
HTTPS: For secure, encrypted communications, only HTTPS
access is accepted. The print server will appear as a secure
site.
HTTP/HTTPS: Access using either HTTP or HTTPS is permitted.
SECURITY= Specify whether the current security settings on the print server
will be saved or reset to factory defaults.
KEEP (default): The current security settings are maintained.
RESET: Security settings are reset to factory defaults.
Table C.1 HP Jetdirect Classic Control Panel Menu (6 of 6)
Menu Item Description

HP C8088B Specifications

General

Brand	HP
Model	C8088B
Category	Printer Accessories
Language	English