f. Release the tape that secures the webcam/microphone module cable (6) to the back cover.
g. Remove the back cover.
NOTE: The back cover is available using spare part number L14333-001 and includes the webcam/
microphone module cable and wireless antenna cables and transceivers.
13. If it is necessary to replace the display hinges:
a. Remove the display bezel.
b. Remove the display panel.
c. Remove the display back cover.
d. Remove the four Phillips PM2.5×4.7 screws (1) that secure the hinges to the bottom cover.
e. Release the hinges (2) by sliding them toward the inside of the computer.
Component replacement procedures 47
To Next Page
Loading...
