TouchPad board
Table 5-6 TouchPad board, bracket, and cable descriptions and part numbers
Description Spare part number
TouchPad board L50832-001
TouchPad bracket L36910-001
TouchPad cable L36898-001
Before removing the TouchPad board, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 20).
2. Remove the bottom cover (see Computer feet and bottom cover on page 20).
3. Remove the battery (see Battery on page 22).
Remove the TouchPad board:
1. Remove the four Phillips M2.0 × 2.5 screws (1) that secure the TouchPad bracket to the TouchPad, and
then remove the TouchPad bracket (2).
2. Disconnect the cable from the TouchPad board ZIF connector (1).
3. Remove the three Phillips M2.0 × 2.5 screws (2) that secure the TouchPad to the computer.
28 Chapter 5 Removal and replacement procedures for authorized service providers
To Next Page
Loading...
