To print the Network configuration report from the control panel
1. Press Menu.
2. Press the navigation arrows to select the Reports menu.
3. Press OK.
4. Press the navigation arrows to select Network report.
5. Press OK to print the Network Configuration page.
1. Network Hardware Configuration. Displays current MFP hardware configuration such as
status, hardware address, firmware datecode, link speed information, and connection timeout.
2. Enabled Features. Displays password, network protocol, memory card, LPD printing, Bonjour,
and HPSLP settings.
3. TCP/IP. Displays host, domain, and printer name, and other IP information.
4. SNMP. Displays status, version, and set/get community names.
5. Network Statistics. Displays packet and collision information.
Fonts pages
The Fonts pages provide lists of the available fonts on the MFP, including HP postscript level 3 fonts,
PCL fonts, and PCL6 fonts.
ENWW Management tools 33
To Next Page
Loading...