System settings
The HP ToolboxFX System Settings folder contains links to the following main pages:
●
Device information. View information about the MFP, such as the description and a contact
person.
●
Paper handling. Change the MFP paper-handling settings, such as default paper size and
default paper type.
●
Print quality. Change the MFP print-quality settings.
● Print density. Change the print density settings, such as contrast, highlights, midtones, and
shadows.
●
Paper types. Change the MFP mode settings for each media type, such as letterhead,
prepunched, or glossy paper.
●
System Setup. Change the MFP system settings, such as MFP language and jam recovery.
●
Service. Gain access to various procedures required to maintain the MFP.
●
Device Polling. The HP ToolboxFX periodically communicates with your device to determine
device status and enable features.
●
Save and restore settings. Save the current MFP settings to a file on the computer. Use this
file to load the same settings onto another printer or MFP to restore these settings to this MFP
at a later time.
●
Password. Set a password for the MFP. If set, the password is required to change any Network
Settings configuration items.
Device information
Save the HP ToolboxFX Device information for future reference about the MFP. The information that
is typed in these fields appears on the Configuration page. It is possible to type any character in each
of these fields.
NOTE Click Apply to make the changes take effect.
38 Chapter 3 Managing and maintenance ENWW
To Next Page
Loading...