●
Print Quality. Configure color calibration and optimize settings.
●
Print Density. Configure print density settings including contrast, highlights, midtones, and
shadows.
●
Paper Types. Configure paper types
●
System Setup. Configure the jam recovery, auto continue, I/O timeout, cartridge-low threshold,
and MFP language settings.
Print tab
This tab allows print configuration from a computer.
The Print tab contains these pages:
●
Printing. Configure default print settings.
●
PCL5c. Configure PCL5c print settings.
●
PostScript. Configure whether PostScript errors are printed.
●
Memory Card (HP Color LaserJet CM1017 only). Configure memory-card defaults.
Networking tab
This tab allows the network administrator to control MFP network-related settings when the MFP is
connected to an IP-based network.
●
IP Configuration. Configure IP settings.
●
Advanced. Enable network features such as SLP Config, DHCP, BOOTP, and AutoIP.
●
Bonjour. Enable Bonjour.
●
SNMP. Set SNMP protocols.
●
Network Summary. Displays network hardware configuration, enabled network features, TCP/
IP settings, and other network-related information.
●
Password. Set or change the administrator password.
44 Chapter 3 Managing and maintenance ENWW
To Next Page
Loading...