During the printing process, paper, toner, and dust particles accumulate inside the MFP. Over time, this
buildup can cause print-quality problems such as toner specks or smearing. Click Start to run the
cleaning mode procedure on the HP Color LaserJet CM1015 MFP/CM1017 MFP.
Device Polling
The HP ToolboxFX periodically communicates with the MFP to determine device status and enabled
features. Use the Device Polling screen to turn off pop-up alerts and the Scan To and Start Scan buttons
on the MFP control panel.
Figure 2-63 Device Polling screen
Save/Restore Settings
Use the Save/Restore Settings screen to save all of the device settings to a file on the computer. Or
load the settings that have been saved into the HP Color LaserJet CM1015 MFP/CM1017 MFP from
this screen.
84 Chapter 2 Software description ENWW
Software description
To Next Page
Loading...