Photo
Use the Photo pane to change the photo setting defaults for the product.
Figure 2-60 HP Toolbox FX Print Settings folder – Photo pane
Click Apply to make the changes take effect.
Network Settings folder
The Network Settings folder is only available with a network installation.
This product contains onboard networking support. This product does not require the use of an external
Jetdirect box for network connectivity. Use Network Settings options to configure the network settings
for the product.
NOTE: External Jetdirect products are not officially supported.
For network installations, HP ToolboxFX communicates with the product by using the network settings
that appear on the panes in the Network Settings folder, which are as follows:
●
Network Summary
●
IPv4 Configuration
●
IPv6 Configuration
●
Network Identification
●
Advanced
●
SNMP
CAUTION: Changing network settings can cause communication problems between HP ToolboxFX
and the product.
76 Chapter 2 Software description ENWW
To Next Page
Loading...