Table 2-7 Advanced Network Settings options and settings
Option Settings
Enabled Features
●
LPD Printing (enabled by default)
●
HP SLP Discovery (enabled by default)
Link Speed and Duplex
●
Auto negotiation (default setting)
●
Manual negotiation
◦
Link speed: 10 megabits per second (Mbps) or 100
Mbps
◦
Duplex: Full or Half
Automatic Crossover
●
Enable (default)
●
Disable
NOTE: Click Apply to make the changes take effect.
SNMP
Use the SNMP pane to set SNMP networking features for the product.
Figure 2-72 HP ToolboxFX Network Settings folder – SNMP pane
The following options are available on the SNMP pane:
Options Description
ENWW HP ToolboxFX 83
Software Description
To Next Page
Loading...