The Advanced tab contains the following settings:
●
Paper/Output
●
Graphic
●
Document Options
Paper/Output setting
Paper/Output contains the Copy Count setting.
Copy Count setting
Copy Count specifies the number of copies that you want to print. This printer-driver setting is useful
for software programs that do not provide a copy count. If the software program contains a copy count,
set the copy count there.
The requested number of copies is displayed in the Copy Count option. Select the number by typing
in the box or by using the up and down arrows on the right side of the text box. For this product, valid
entries are numbers from 1 to 9999. The copies value will not change from the maximum number (9999)
to 1 when the up arrow is used, or change from 1 to the maximum number (9999) when the down arrow
is used.
When you click another group box or leave the Advanced tab, invalid entries into the edit box (such as
non-numerical input, numbers less than 1, or numbers greater than 9999) change to the last valid value
that appeared in the box. The default number of copies is 1.
Problems can develop when the software program that you are using and the printer-driver it is running
on both allow the user to set the number of copies to print. In most cases, the software program and the
printer-driver communicate, so that the number of copies set in one location (such as the program)
appears in the other (such as the printer-driver). However, for some software programs this
communication does not take place, and the separate copy count values are treated independently. For
example, setting 10 copies in the program and then setting 10 copies in the printer-driver might result
in the product making 100 copies (10 x 10). For this reason, HP recommends that you set the number
of copies in the software program whenever possible.
Graphic setting
Graphic contains the following setttings:
●
Image Color Management (HP PCL 6 and HP PS Emulation only)
●
TrueType Font
ENWW Advanced tab features 165
HP PCL 6 and universal
printer-driver (UPD) for
Windows
To Next Page
Loading...