Figure 2-22 HP ToolboxFX Alerts folder – Set up E-mail Alerts pane (2 of 3)
Figure 2-23 HP ToolboxFX Alerts folder – Set up E-mail Alerts pane (3 of 3)
E-mail messages can be sent about the supplies status of, or events (such as a jam) related to, the
product. Select the specific events about which you want notification.
Use the following procedure to activate this feature:
1. Type in a valid e-mail address. Up to two e-mail addresses can be configured to receive messages
for each event.
2. Select the events for which you want notification.
3. Configure the SNMP e-mail server that will be used to send the e-mail message.
4. Click Apply to make the changes take effect.
44 Chapter 2 Software description ENWW
To Next Page
Loading...