Memory DIMM
Before proceeding, remove the following components:
●
Formatter PCA. See
Formatter PCA on page 192.
Remove the memory DIMM
CAUTION: ESD sensitive component.
NOTE: See Enable memory for Windows on page 194 after installing a new memory DIMM.
1. Place the formatter on a clean, flat, grounded surface.
2. Release on tab, and raise the hard drive mounting bracket to access the memory DIMM.
Figure 6-15 Remove the memory DIMM (1 of 2)
ENWW Customer self repair (CSR) components 193
To Next Page
Loading...
